ProductionOperationKind

Type: Enum

ISO 19593-1 production / finishing operation kind

Values

Value	Description	Deprecated
BLEED	The declared bleed region — artwork extending past the cut so no white edge shows after trimming.
CREASE	A pressed line that lets the substrate fold cleanly without cracking. Covers both the front and reverse variants.
CUSTOM	A processing step whose group or type is not one ISO 19593-1 defines. The raw group and type strings are preserved on the operation so the original intent is not lost.
CUT	A through cut that separates the substrate — the ISO 19593-1 Cutting step.
DIMENSION	Dimension annotations on the artwork. Documentation for the operator, not something the press or finishing line produces.
DRILL	A round drilled hole, typically for ring binding.
FOLD	A fold line, marking where the substrate is folded rather than where it is creased.
GLUE	An area where adhesive is applied when the item is assembled.
LEGEND	Job legend and marks — colour bars, registration marks, slugs — which sit off the finished product.
PARTIAL_CUT	A cut that does not go through the full thickness, such as a kiss cut through a face stock but not its liner. Covers both the front and reverse variants.
PERFORATE	A line of small cuts leaving the substrate joined but tearable by hand.
POSITION	Positional markers on the artwork, again documentation rather than a produced feature.
PUNCH	A shaped hole made with a punch tool.
REVERSE_CUT	A cut made from the reverse of the sheet, for artwork that is viewed through the substrate.
UNKNOWN	The engine reported an operation kind this build does not recognise, typically from a newer engine version.
VARNISH	A coating applied over the printed surface, whether flood or spot.
WHITE_UNDERPRINT	A white ink layer laid under the artwork, so colours stay opaque on clear or metallic substrates.