Appearance
GangingPlan
Type: Object
A ganging layout plan (N-up mode)
Fields
| Name | Type | Args | Description | Deprecated |
|---|---|---|---|---|
| cols | Int! | Columns of items in the step-and-repeat grid | ||
| gutterH | Length! | Horizontal gap between adjacent columns, in mm (as requested) | ||
| gutterV | Length! | Vertical gap between adjacent rows, in mm (as requested) | ||
| layout | SheetLayout! | Full sheet placement geometry for rendering | ||
| orientation | ImpositionOrientation! | Sheet orientation the fitter settled on (portrait or landscape). Both sheet rotations are tried; the one yielding the most ups wins. | ||
| pagesUp | Int! | Items placed per sheet side (rows × cols) | ||
| rows | Int! | Rows of items in the step-and-repeat grid | ||
| sheetsRequired | Int! | Press sheets needed for the requested quantity: ceil(quantity ÷ pagesUp). 1 when no quantity was supplied. | ||
| substrate | SubstrateInput! | Substrate this plan gangs onto; its sheet size is what the grid was fitted against | ||
| utilisation | Float! | Sheet area covered by the ganged cells, as a ratio in 0.0–1.0 — NOT a 0–100 percentage. 0.86 means 86% of the sheet area is covered. Computed as used cell area ÷ total sheet area, where a cell is the finished size plus bleed on all sides. |