← All types
PrepressOb Object

ProductionOperation

One ISO 19593-1 production operation (heavy polyline geometry omitted)

Fields

ocgName

String!Non-null

Name of the optional-content layer (OCG) carrying the step, e.g. "CutContour"

group

String!Non-null

The layer's declared /GTS_ProcStepsGroup, e.g. "Structural", "White", "Varnish", "Legend"

The layer's declared /GTS_ProcStepsType within the group, e.g. "Cutting"; null for a typeless group (such as White or Varnish)

The semantic operation the step resolves to (cut, crease, fold, varnish, …); UNKNOWN when the declared group/type is not recognised

Possible values (17)
CUT

A through cut that separates the substrate — the ISO 19593-1 Cutting step.

REVERSE_CUT

A cut made from the reverse of the sheet, for artwork that is viewed through the substrate.

PARTIAL_CUT

A cut that does not go through the full thickness, such as a kiss cut through a face stock but not its liner. Covers both the front and reverse variants.

CREASE

A pressed line that lets the substrate fold cleanly without cracking. Covers both the front and reverse variants.

FOLD

A fold line, marking where the substrate is folded rather than where it is creased.

PERFORATE

A line of small cuts leaving the substrate joined but tearable by hand.

PUNCH

A shaped hole made with a punch tool.

DRILL

A round drilled hole, typically for ring binding.

GLUE

An area where adhesive is applied when the item is assembled.

BLEED

The declared bleed region — artwork extending past the cut so no white edge shows after trimming.

VARNISH

A coating applied over the printed surface, whether flood or spot.

WHITE_UNDERPRINT

A white ink layer laid under the artwork, so colours stay opaque on clear or metallic substrates.

DIMENSION

Dimension annotations on the artwork. Documentation for the operator, not something the press or finishing line produces.

POSITION

Positional markers on the artwork, again documentation rather than a produced feature.

LEGEND

Job legend and marks — colour bars, registration marks, slugs — which sit off the finished product.

CUSTOM

A processing step whose group or type is not one ISO 19593-1 defines. The raw group and type strings are preserved on the operation so the original intent is not lost.

UNKNOWN

The engine reported an operation kind this build does not recognise, typically from a newer engine version.

JDF-style process label for mapping onto a host process model. A label only — no JDF/XML is emitted.

The spot colourant the step paints in (e.g. "CutContour"); null when the step declares none

pages

[Int!]!Non-null

1-based pages this step appears on

extentMM

[Float!]!Non-null

Bounding extent [minX, minY, maxX, maxY] in mm

Total path length in millimetres. Meaningful for line operations (cut/crease/fold/perf); near zero for area operations.

Number of line segments across all of the step's flattened subpaths

Number of subpaths (distinct pen-down runs) in the step's geometry

Number of closed contours — candidate pieces, counted before holes are reduced out, so a die with cut-outs over-counts here

openPaths

Int!Non-null

Number of open (unclosed) subpaths, e.g. crease and fold lines

Inked-area coverage for area operations (varnish/white); null for line operations or when the rendered analysis tier did not run

Referenced by (1)
Exact type SDL
"""One ISO 19593-1 production operation (heavy polyline geometry omitted)"""
type ProductionOperation {
  """
  Name of the optional-content layer (OCG) carrying the step, e.g. "CutContour"
  """
  ocgName: String!
  """
  The layer's declared `/GTS_ProcStepsGroup`, e.g. "Structural", "White", "Varnish", "Legend"
  """
  group: String!
  """
  The layer's declared `/GTS_ProcStepsType` within the group, e.g. "Cutting"; null for a typeless group (such as White or Varnish)
  """
  stepType: String
  """
  The semantic operation the step resolves to (cut, crease, fold, varnish, …); UNKNOWN when the declared group/type is not recognised
  """
  operation: ProductionOperationKind!
  """
  JDF-style process label for mapping onto a host process model. A label only — no JDF/XML is emitted.
  """
  jdfProcess: String!
  """
  The spot colourant the step paints in (e.g. "CutContour"); null when the step declares none
  """
  colorant: String
  """1-based pages this step appears on"""
  pages: [Int!]!
  """Bounding extent [minX, minY, maxX, maxY] in mm"""
  extentMM: [Float!]!
  """
  Total path length in millimetres. Meaningful for line operations (cut/crease/fold/perf); near zero for area operations.
  """
  totalLengthMM: Float!
  """Number of line segments across all of the step's flattened subpaths"""
  segmentCount: Int!
  """Number of subpaths (distinct pen-down runs) in the step's geometry"""
  subpathCount: Int!
  """
  Number of closed contours — candidate pieces, counted before holes are reduced out, so a die with cut-outs over-counts here
  """
  closedContours: Int!
  """Number of open (unclosed) subpaths, e.g. crease and fold lines"""
  openPaths: Int!
  """
  Inked-area coverage for area operations (varnish/white); null for line operations or when the rendered analysis tier did not run
  """
  coverage: ProductionCoverage
}