← All types
PrepressOb Object

BookCoverConstructionSettings

Retained construction inputs with original quantity units.

Fields

Caller-supplied construction recipe identity; no recipe registry lookup.

Revision of the supplied process parameters.

Caller reference identifying the basis of the process parameters; not approval or certification.

Supported construction: softcover or exterior case wrap.

Possible values (2)
SOFTCOVER

Three-panel softcover spread without case joints or turn-ins.

CASE_WRAP

Exterior case wrap with explicit joints and rectangular turn-in reservations; no corner-cut instructions.

LEFT or RIGHT only; top and bottom binding are unsupported.

Possible values (3)
LEFT

Left edge of the upright reader page

RIGHT

Right edge of the upright reader page

TOP

Top edge of the upright reader page

Explicit multiplier of summed paper caliper. 1 means unchanged; precision is one part per million.

Additional physical thickness after applying the factor; omitted means zero.

Signed adjustment from block thickness to cover spine width; omitted means zero.

Signed adjustment from block trim width to front face/board width.

Signed adjustment from block trim width to back face/board width.

Signed adjustment from block trim height to face/board height.

Front joint width; required positive for case wrap, zero for softcover.

Back joint width; required positive for case wrap, zero for softcover.

Left turn-in reservation; positive for case wrap.

Right turn-in reservation; positive for case wrap.

Bottom turn-in reservation; positive for case wrap.

Top turn-in reservation; positive for case wrap.

bleed

LengthNullable

Uniform exterior bleed; omitted means zero.

Referenced by (1)
Exact type SDL
"""Retained construction inputs with original quantity units."""
type BookCoverConstructionSettings {
  """
  Caller-supplied construction recipe identity; no recipe registry lookup.
  """
  recipeId: String!
  """Revision of the supplied process parameters."""
  revision: String!
  """
  Caller reference identifying the basis of the process parameters; not approval or certification.
  """
  calibrationReference: String!
  """Supported construction: softcover or exterior case wrap."""
  kind: BookCoverConstructionKind!
  """LEFT or RIGHT only; top and bottom binding are unsupported."""
  bindingSide: BindingSide!
  """
  Explicit multiplier of summed paper caliper. 1 means unchanged; precision is one part per million.
  """
  thicknessFactor: Float!
  """
  Additional physical thickness after applying the factor; omitted means zero.
  """
  addedThickness: Length
  """
  Signed adjustment from block thickness to cover spine width; omitted means zero.
  """
  spineAdjustment: Length
  """Signed adjustment from block trim width to front face/board width."""
  frontWidthDelta: Length
  """Signed adjustment from block trim width to back face/board width."""
  backWidthDelta: Length
  """Signed adjustment from block trim height to face/board height."""
  heightDelta: Length
  """
  Front joint width; required positive for case wrap, zero for softcover.
  """
  frontJoint: Length
  """Back joint width; required positive for case wrap, zero for softcover."""
  backJoint: Length
  """Left turn-in reservation; positive for case wrap."""
  leftTurnIn: Length
  """Right turn-in reservation; positive for case wrap."""
  rightTurnIn: Length
  """Bottom turn-in reservation; positive for case wrap."""
  bottomTurnIn: Length
  """Top turn-in reservation; positive for case wrap."""
  topTurnIn: Length
  """Uniform exterior bleed; omitted means zero."""
  bleed: Length
}