GangingPlan
A ganging layout plan (N-up mode)
Fields
Build a versioned cut-stack payload from this one-sheet repeat template. Template quantity must be omitted or one. Stack first form on top and gather piles in payload order. Pass unchanged to imposePdfInline.
Arguments (2)
Number of unique source pages; duplex requires complete consecutive front/back pairs
Whole ordered batches to manufacture; defaults to one
Versioned repeat-plan payload for imposePdfInline, preserving geometry, source assignment and quantity
Rows of items in the step-and-repeat grid
Columns of items in the step-and-repeat grid
Items placed per sheet side (rows × cols)
Printed forms per sheet: one for simplex repeat, two for explicit sheetwise duplex repeat
Press sheets needed for the requested quantity: ceil(quantity ÷ pagesUp). 1 when no quantity was supplied.
Substrate this plan gangs onto; its sheet size is what the grid was fitted against
Sheet orientation the fitter settled on (portrait or landscape). Both sheet rotations are tried; the one yielding the most ups wins.
Possible values (3)
PORTRAITPortrait orientation
LANDSCAPELandscape orientation
BEST_FITBest-fit (automatic orientation selection)
Sheet area covered by the ganged cells, as a ratio in 0.0–1.0 — NOT a 0–100 percentage. 0.86 means 86% of the sheet area is covered. Computed as used cell area ÷ total sheet area, where a cell is the finished size plus bleed on all sides.
Horizontal gap between adjacent columns, in mm (as requested)
Vertical gap between adjacent rows, in mm (as requested)
Full sheet placement geometry for rendering
Exact type SDL
"""A ganging layout plan (N-up mode)"""
type GangingPlan {
"""
Build a versioned cut-stack payload from this one-sheet repeat template. Template quantity must be omitted or one. Stack first form on top and gather piles in payload order. Pass unchanged to imposePdfInline.
"""
cutStackRenderPlanJSON(
"""
Number of unique source pages; duplex requires complete consecutive front/back pairs
"""
sourcePageCount: Int!
"""Whole ordered batches to manufacture; defaults to one"""
batchCount: Int
): String!
"""
Versioned repeat-plan payload for imposePdfInline, preserving geometry, source assignment and quantity
"""
renderPlanJSON: String!
"""Rows of items in the step-and-repeat grid"""
rows: Int!
"""Columns of items in the step-and-repeat grid"""
cols: Int!
"""Items placed per sheet side (rows × cols)"""
pagesUp: Int!
"""
Printed forms per sheet: one for simplex repeat, two for explicit sheetwise duplex repeat
"""
totalForms: Int!
"""
Press sheets needed for the requested quantity: ceil(quantity ÷ pagesUp). 1 when no quantity was supplied.
"""
sheetsRequired: Int!
"""
Substrate this plan gangs onto; its sheet size is what the grid was fitted against
"""
substrate: SubstrateInput!
"""
Sheet orientation the fitter settled on (portrait or landscape). Both sheet rotations are tried; the one yielding the most ups wins.
"""
orientation: ImpositionOrientation!
"""
Sheet area covered by the ganged cells, as a ratio in 0.0–1.0 — NOT a 0–100 percentage. 0.86 means 86% of the sheet area is covered. Computed as used cell area ÷ total sheet area, where a cell is the finished size plus bleed on all sides.
"""
utilisation: Float!
"""Horizontal gap between adjacent columns, in mm (as requested)"""
gutterH: Length!
"""Vertical gap between adjacent rows, in mm (as requested)"""
gutterV: Length!
"""Full sheet placement geometry for rendering"""
layout: SheetLayout!
}