Resource
work_center
A work center (machine, person, tool, or location)
Configuration
externalIdStringOptionalExternal system ID (must be unique per tenant)
productionCellIdProductionCellIDOptionalTypeID (prefix "pcl") of the production cell to place this work center in. Omit to leave it ungrouped.
References production_cell
costCenterIdCostCenterIDOptionalAssociated cost center for rate lookup
References cost_center
nameString!RequiredWork center name (required)
resourceTypeResourceType!OptionalType of work center resource (defaults to machine)
Allowed values
MACHINE — Equipment that performs the work itself — a press, folder, cutter or similar. The default for a work centre created without a resource type.
HUMAN — A person rather than equipment; such a work centre normally carries linkedUserId pointing at the platform user it stands for.
TOOL — A reusable piece of tooling — a die, plate, jig or fixture — tracked as a bookable resource in its own right rather than as part of the machine that uses it.
LOCATION — A place rather than a worker or a machine — a bay, staging area or storage position — modelled as a work centre so that time on it can be booked.
linkedUserIdUserIDOptionalTypeID (prefix "usr") of the platform user this work center represents. Typically set for human resources.
References service_account
efficiencyFactorFloat!OptionalEfficiency factor (defaults to 1.0)
isActiveBoolean!OptionalWhether the work center is available for scheduling (defaults to true)
lifecycleWorkCenterLifecycle!OptionalLifecycle: CONCEPT (planned or simulation only), ACTIVE (in the running plant) or ARCHIVED (retired, kept for history). Defaults to ACTIVE.
Allowed values
CONCEPT — Planned or experimental, for example a machine being evaluated in simulation. Not part of the running plant and not shown on the production board.
ACTIVE — Part of the running plant. The default.
ARCHIVED — Retired. Kept for history and reporting; not part of the running plant.
isMonitoredBoolean!OptionalWhether this work center is expected to report status. Set false for occasional manual stations or legacy machines so they never raise production attention. Defaults to true.
jmfDeviceIdStringOptionalLegacy JMF DeviceID alias for incoming signals. Print uses the canonical per-binding identifier set by setWorkCenterDeviceJMFDeviceID; aliases are not copied between bindings and work centers. Conflicting mappings to different work centers are not correlated.
defaultSetupMinutesInt!OptionalAverage setup time in minutes before each operation. Cannot be negative; defaults to 0.
defaultProcessingRateFloatOptionalProcessing rate in units per minute. Must be positive when set; omit to use each operation's expected duration instead.
defaultCleanupMinutesInt!OptionalAverage cleanup time in minutes after each operation. Cannot be negative; defaults to 0.
defaultSetupWasteQuantityFloatOptionalPlanned waste per makeready on this machine, in the operation's own unit. Finite and nonnegative; omit for none.
defaultRunWastePercentFloatOptionalPlanned running waste as a percentage of net quantity, at least 0 and below 1000; omit for none.
twinWorkCenterTwin!OptionalThe work centre's digital twin: its declared settings and the values the platform resolves from them. Written by configureWorkCenterTwin, never by the work centre's own update.
Input types
Fields for the structured values used in this resource’s configuration.
WorkCenterTwin
A work centre's digital twin as a read object: what is declared for it and what is in force. The live judgement is workCenterTwinShadow; the learned behaviour is workCenterBehaviorProfile
settingsWorkCenterTwinSettings!RequiredThe declared settings; written whole by configureWorkCenterTwin
effectiveWorkCenterTwinEffectiveSettings!RequiredThe values the platform resolves from the settings and its defaults
WorkCenterTwinSettings
The twin settings an author declares for a work centre. Null means the server default; the resolved values are in WorkCenterTwin.effective
onTrackQuantileTwinQuantileOptionalLive shadow hysteresis bound: once DRIFTING, an operation returns to ON_TRACK only while elapsed time is at or below this quantile of the profile cell or its pace projection meets the plan. Null uses P50.
Allowed values
P05 — 5th percentile of the profile cell
P10 — 10th percentile of the profile cell
P25 — 25th percentile of the profile cell
P50 — Median of the profile cell
P75 — 75th percentile of the profile cell
P90 — 90th percentile of the profile cell
P95 — 95th percentile of the profile cell
driftingQuantileTwinQuantileOptionalLive shadow: elapsed time past this quantile is DRIFTING. Null uses P90. Never below onTrackQuantile.
Allowed values
P05 — 5th percentile of the profile cell
P10 — 10th percentile of the profile cell
P25 — 25th percentile of the profile cell
P50 — Median of the profile cell
P75 — 75th percentile of the profile cell
P90 — 90th percentile of the profile cell
P95 — 95th percentile of the profile cell
stallMinutesIntOptionalLive shadow: no progress point for this many minutes in SETUP or RUNNING is STALLED. Null uses the phase cell's P50, capped by the server's maximum.
downOverdueMinutesIntOptionalLive shadow: DOWN or ERROR for longer than this is DOWN_OVERDUE. Null uses the profile's mean time to repair × ln 10.
paceSlowingPercentIntOptionalPace track: SLOWING once the forecast pace is this many percent slower than the machine's own history, STEADY again at half that. 1–100. Null uses 10.
WorkCenterTwinEffectiveSettings
The twin settings as resolved by the platform. The stall and overdue windows resolve per machine from its profile and are not reported here
onTrackQuantileTwinQuantile!RequiredThe on-track quantile in force
Allowed values
P05 — 5th percentile of the profile cell
P10 — 10th percentile of the profile cell
P25 — 25th percentile of the profile cell
P50 — Median of the profile cell
P75 — 75th percentile of the profile cell
P90 — 90th percentile of the profile cell
P95 — 95th percentile of the profile cell
driftingQuantileTwinQuantile!RequiredThe drifting quantile in force
Allowed values
P05 — 5th percentile of the profile cell
P10 — 10th percentile of the profile cell
P25 — 25th percentile of the profile cell
P50 — Median of the profile cell
P75 — 75th percentile of the profile cell
P90 — 90th percentile of the profile cell
P95 — 95th percentile of the profile cell
paceSlowingPercentInt!RequiredThe pace slowing percentage in force
Read-only values
Show values
idWorkCenterID!Read onlyTypeID of the work center (prefix "wcr", e.g. "wcr_01K…").
computed by the platform
externalUrlStringRead onlyExternal URL for the calling integration, or the primary identity for unscoped callers.
computed by the platform
externalIdentities[RecordExternalIdentity!]!Read onlyAll linked external identities, including identities belonging to other integrations.
computed by the platform
createdByIntegrationIdIntegrationInstanceIDRead onlyIntegration instance that originally created this record, when known.
References integration_instance
computed by the platform
createdByStackIdIaCStackIDRead onlyIaC stack that originally created this record, when known.
computed by the platform
managedByStackIdIaCStackIDRead onlyIaC stack currently managing this record's configuration and deletion.
computed by the platform
createdAtISO8601!Read onlyISO 8601 timestamp of when the work center was first created.
computed by the platform
updatedAtISO8601!Read onlyISO 8601 timestamp of the last mutation to this work center. Equal to createdAt until it is first updated.
computed by the platform
Lifecycle
The CLI can create this resource. The platform assigns its id.
When replacement is needed, the existing resource is removed before its replacement is created.