← All resources

Resource

substrate_template_line

A BOM rule: how much of a substrate a product template requires per 100 finished copies

GraphQL reference →

Configuration

productTemplateIdProductTemplateID!Required

Product template ID (required)

References product_template

componentLocalIdStringOptional

Component local ID (omit = applies to all)

substrateIdSubstrateID!Required

Substrate ID (required)

References substrate

quantityPer100Float!Required

Quantity per 100 finished copies (required)

unitMeasurementUnit!Required

Measurement unit: SHEET, M, or KG (required)

Allowed values

CLICK — A billing counter rather than a physical measure: one metered page charged under a cost-per-click press or copier contract.

CM — Centimetres — metric length, a hundredth of a metre.

FT — Feet — imperial length, twelve inches.

G — Grams — metric mass, for light items stocked by weight.

IMPRESSION — A production counter rather than a physical measure: one pass of one sheet through a press. Distinct from SHEET, since a sheet printed on both sides can cost two impressions.

IN — Inches — imperial length, the unit paper sizes are quoted in outside metric markets.

KG — Kilograms — metric mass, the usual unit for reel and other bulk substrate stock.

LB — Pounds — imperial mass, roughly 0.45 kg.

M — Metres — metric length, the usual unit for material bought by the running metre such as a reel or a roll of laminate.

MM — Millimetres — metric length, a thousandth of a metre, and the granularity trim sizes and other sheet dimensions are normally given in.

OZ — Ounces — imperial mass, a sixteenth of a pound.

PC — Pieces: a plain count of discrete items, carrying no dimension at all. The unit stock and transfer quantities fall back to when none is given.

PT — Points — the typographic length unit of one seventy-second of an inch, used for type sizes and rule weights rather than for stock quantities.

REPEAT — One printed repeat of a web: a cut-off in web offset, a repeat in flexo and labels. What a roll press counts when it produces signatures.

SHEET — A count of substrate sheets, the usual unit for sheet-fed stock. Counts the physical sheets held or moved, not the press passes over them (see IMPRESSION).

wasteFactorFloat!Optional

Spoilage factor ≥ 1.0 (default: 1.0)

notesStringOptional

Internal notes

Read-only values

Show values
idSubstrateTemplateLineID!Read only

Unique identifier

computed by the platform

createdAtString!Read only

Creation timestamp (ISO8601)

computed by the platform

updatedAtString!Read only

Last update timestamp (ISO8601)

computed by the platform

Lifecycle

The CLI can create this resource. The platform assigns its id.

When replacement is needed, the existing resource is removed before its replacement is created.