ProductionOperationKind
ISO 19593-1 production / finishing operation kind
Values
CUT
A through cut that separates the substrate — the ISO 19593-1 Cutting step.
REVERSE_CUT
A cut made from the reverse of the sheet, for artwork that is viewed through the substrate.
PARTIAL_CUT
A cut that does not go through the full thickness, such as a kiss cut through a face stock but not its liner. Covers both the front and reverse variants.
CREASE
A pressed line that lets the substrate fold cleanly without cracking. Covers both the front and reverse variants.
FOLD
A fold line, marking where the substrate is folded rather than where it is creased.
PERFORATE
A line of small cuts leaving the substrate joined but tearable by hand.
PUNCH
A shaped hole made with a punch tool.
DRILL
A round drilled hole, typically for ring binding.
GLUE
An area where adhesive is applied when the item is assembled.
BLEED
The declared bleed region — artwork extending past the cut so no white edge shows after trimming.
VARNISH
A coating applied over the printed surface, whether flood or spot.
WHITE_UNDERPRINT
A white ink layer laid under the artwork, so colours stay opaque on clear or metallic substrates.
DIMENSION
Dimension annotations on the artwork. Documentation for the operator, not something the press or finishing line produces.
POSITION
Positional markers on the artwork, again documentation rather than a produced feature.
LEGEND
Job legend and marks — colour bars, registration marks, slugs — which sit off the finished product.
CUSTOM
A processing step whose group or type is not one ISO 19593-1 defines. The raw group and type strings are preserved on the operation so the original intent is not lost.
UNKNOWN
The engine reported an operation kind this build does not recognise, typically from a newer engine version.
Referenced by (1)
Exact type SDL
"""ISO 19593-1 production / finishing operation kind"""
enum ProductionOperationKind {
"""
A through cut that separates the substrate — the ISO 19593-1 Cutting step.
"""
CUT
"""
A cut made from the reverse of the sheet, for artwork that is viewed through the substrate.
"""
REVERSE_CUT
"""
A cut that does not go through the full thickness, such as a kiss cut through a face stock but not its liner. Covers both the front and reverse variants.
"""
PARTIAL_CUT
"""
A pressed line that lets the substrate fold cleanly without cracking. Covers both the front and reverse variants.
"""
CREASE
"""
A fold line, marking where the substrate is folded rather than where it is creased.
"""
FOLD
"""
A line of small cuts leaving the substrate joined but tearable by hand.
"""
PERFORATE
"""A shaped hole made with a punch tool."""
PUNCH
"""A round drilled hole, typically for ring binding."""
DRILL
"""An area where adhesive is applied when the item is assembled."""
GLUE
"""
The declared bleed region — artwork extending past the cut so no white edge shows after trimming.
"""
BLEED
"""A coating applied over the printed surface, whether flood or spot."""
VARNISH
"""
A white ink layer laid under the artwork, so colours stay opaque on clear or metallic substrates.
"""
WHITE_UNDERPRINT
"""
Dimension annotations on the artwork. Documentation for the operator, not something the press or finishing line produces.
"""
DIMENSION
"""
Positional markers on the artwork, again documentation rather than a produced feature.
"""
POSITION
"""
Job legend and marks — colour bars, registration marks, slugs — which sit off the finished product.
"""
LEGEND
"""
A processing step whose group or type is not one ISO 19593-1 defines. The raw group and type strings are preserved on the operation so the original intent is not lost.
"""
CUSTOM
"""
The engine reported an operation kind this build does not recognise, typically from a newer engine version.
"""
UNKNOWN
}