← All types
Ob Object

PlannedQuantitiesOutput

Planned net quantity and waste: the estimate's benchmark for post calculation.

Fields

Net good output, in quantityUnit (on an item: the operation's unit).

Unit of quantity and every waste figure: sheets, repeats or pieces. Null on items.

Possible values (15)
CLICK

A billing counter rather than a physical measure: one metered page charged under a cost-per-click press or copier contract.

CM

Centimetres — metric length, a hundredth of a metre.

FT

Feet — imperial length, twelve inches.

G

Grams — metric mass, for light items stocked by weight.

IMPRESSION

A production counter rather than a physical measure: one pass of one sheet through a press. Distinct from SHEET, since a sheet printed on both sides can cost two impressions.

IN

Inches — imperial length, the unit paper sizes are quoted in outside metric markets.

KG

Kilograms — metric mass, the usual unit for reel and other bulk substrate stock.

LB

Pounds — imperial mass, roughly 0.45 kg.

M

Metres — metric length, the usual unit for material bought by the running metre such as a reel or a roll of laminate.

MM

Millimetres — metric length, a thousandth of a metre, and the granularity trim sizes and other sheet dimensions are normally given in.

OZ

Ounces — imperial mass, a sixteenth of a pound.

PC

Pieces: a plain count of discrete items, carrying no dimension at all. The unit stock and transfer quantities fall back to when none is given.

PT

Points — the typographic length unit of one seventy-second of an inch, used for type sizes and rule weights rather than for stock quantities.

REPEAT

One printed repeat of a web: a cut-off in web offset, a repeat in flexo and labels. What a roll press counts when it produces signatures.

SHEET

A count of substrate sheets, the usual unit for sheet-fed stock. Counts the physical sheets held or moved, not the press passes over them (see IMPRESSION).

Fixed waste per makeready, in quantityUnit.

Running waste as a percentage of the net quantity.

Extra output needed to cover later operations' waste. Derived; null on items.

Net quantity plus setup waste, run waste and downstream allowance. Derived.

Work centre the estimate costed this operation on. Null on items and untimed operations.

Referenced by (2)
Exact type SDL
"""
Planned net quantity and waste: the estimate's benchmark for post calculation.
"""
type PlannedQuantitiesOutput {
  """Net good output, in quantityUnit (on an item: the operation's unit)."""
  quantity: Float
  """
  Unit of quantity and every waste figure: sheets, repeats or pieces. Null on items.
  """
  quantityUnit: MeasurementUnit
  """Fixed waste per makeready, in quantityUnit."""
  setupWasteQuantity: Float
  """Running waste as a percentage of the net quantity."""
  runWastePercent: Float
  """
  Extra output needed to cover later operations' waste. Derived; null on items.
  """
  downstreamAllowanceQuantity: Float
  """
  Net quantity plus setup waste, run waste and downstream allowance. Derived.
  """
  grossQuantity: Float
  """
  Work centre the estimate costed this operation on. Null on items and untimed operations.
  """
  estimatedWorkCenterId: WorkCenterID
}