← All types
In Input object

FoldInstructionInput

Typed fold instruction. Physical dimensions use the containing imposition request's shared length units.

Fields

FOLD requires all fraction and sense fields; TURN forbids them.

Possible values (2)
FOLD

Reflect the near packet and place it over or under the far packet.

TURN

CIP4 '+': alternate clockwise and counterclockwise feed-direction changes.

Moving-packet placement, required only for FOLD.

Possible values (2)
OVER

Deposit the reflected moving packet above the stationary packet.

UNDER

Deposit the reflected moving packet below the stationary packet.

numerator

IntOptional

Positive dimensionless numerator measured against the original open sheet, required only for FOLD.

Denominator greater than numerator; reduced denominator must be at most 256. Required only for FOLD.

Referenced by (1)
Exact type SDL
"""
Typed fold instruction. Physical dimensions use the containing imposition request's shared length units.
"""
input FoldInstructionInput {
  """FOLD requires all fraction and sense fields; TURN forbids them."""
  kind: FoldInstructionKind!
  """Moving-packet placement, required only for FOLD."""
  sense: FoldSense
  """
  Positive dimensionless numerator measured against the original open sheet, required only for FOLD.
  """
  numerator: Int
  """
  Denominator greater than numerator; reduced denominator must be at most 256. Required only for FOLD.
  """
  denominator: Int
}