← All types
In Input object

CreateSubstrateTemplateLineInput

Fields for creating a substrate template line

Fields

Product template ID (required)

Component local ID (omit = applies to all)

Substrate ID (required)

Quantity per 100 finished copies (required)

Measurement unit: SHEET, M, or KG (required)

Possible values (15)
CLICK

A billing counter rather than a physical measure: one metered page charged under a cost-per-click press or copier contract.

CM

Centimetres — metric length, a hundredth of a metre.

FT

Feet — imperial length, twelve inches.

G

Grams — metric mass, for light items stocked by weight.

IMPRESSION

A production counter rather than a physical measure: one pass of one sheet through a press. Distinct from SHEET, since a sheet printed on both sides can cost two impressions.

IN

Inches — imperial length, the unit paper sizes are quoted in outside metric markets.

KG

Kilograms — metric mass, the usual unit for reel and other bulk substrate stock.

LB

Pounds — imperial mass, roughly 0.45 kg.

M

Metres — metric length, the usual unit for material bought by the running metre such as a reel or a roll of laminate.

MM

Millimetres — metric length, a thousandth of a metre, and the granularity trim sizes and other sheet dimensions are normally given in.

OZ

Ounces — imperial mass, a sixteenth of a pound.

PC

Pieces: a plain count of discrete items, carrying no dimension at all. The unit stock and transfer quantities fall back to when none is given.

PT

Points — the typographic length unit of one seventy-second of an inch, used for type sizes and rule weights rather than for stock quantities.

REPEAT

One printed repeat of a web: a cut-off in web offset, a repeat in flexo and labels. What a roll press counts when it produces signatures.

SHEET

A count of substrate sheets, the usual unit for sheet-fed stock. Counts the physical sheets held or moved, not the press passes over them (see IMPRESSION).

Spoilage factor ≥ 1.0 (default: 1.0)

notes

StringOptional

Internal notes

Referenced by (1)
Exact type SDL
"""Fields for creating a substrate template line"""
input CreateSubstrateTemplateLineInput {
  """Product template ID (required)"""
  productTemplateId: ProductTemplateID!
  """Component local ID (omit = applies to all)"""
  componentLocalId: String
  """Substrate ID (required)"""
  substrateId: SubstrateID!
  """Quantity per 100 finished copies (required)"""
  quantityPer100: Float!
  """Measurement unit: SHEET, M, or KG (required)"""
  unit: MeasurementUnit!
  """Spoilage factor ≥ 1.0 (default: 1.0)"""
  wasteFactor: Float
  """Internal notes"""
  notes: String
}