CreateProductionReportInput
Input for createProductionReport.
Fields
Display name (Durst's "title").
User associated with this report (typically the operator on duty).
Free-form operator identifier when no user maps to the source-side operator (e.g. partner login, badge number).
Optional Job binding at write time.
Optional Component binding.
Optional Operation binding.
Optional OperationItem binding.
Optional WorkCenter binding.
Multi-namespace external references for late binding.
Partner-internal grouping keys (e.g. their jobId/printJobId). Implicitly scoped by the calling integration instance.
ISO8601 start time.
ISO8601 end time.
Engaged-print-time only; distinct from end-start wall-clock.
Waste produced by the run in countUnit; omitted means unknown.
The part of wasteCount produced during setup (makeready), in countUnit. Requires wasteCount and cannot exceed it; the rest is run waste. Omitted means the source did not split it.
True when this is the final statement of the run. A final report cannot be edited; it is corrected by a new revision that supersedes it. A report that is not final can be edited by sending it again with the same source series and revision. Provisional, in-progress figures belong in progress points.
The current final report this one replaces, when the source's data changed after it was reported. The replacement must be final and complete: the same source series, operation, item and count unit, every measured field the replaced report had, and every material line it had (send an explicit zero rather than leaving one out). Refused once the replaced report's output has been accepted.
The report's identity in the system it came from. With it, sending the same report again is safe: identical content returns the saved report, and a report that is not final is edited in place. Omit for a report with no external identity.
Good production count in countUnit; omitted means unknown.
Planned production quantity.
Unit for counts.
Possible values (39)
NONENo unit
PERCENTPercentage (0-100)
RATIORatio (0.0-1.0)
BOOLEANBoolean (0 or 1)
COUNTGeneric count
PIECESDiscrete pieces/items
MILLIMETERSMillimeters
METERSMeters
INCHESInches
FEETFeet
METERS_PER_MINUTEMeters per minute
FEET_PER_MINUTEFeet per minute
UNITS_PER_MINUTEUnits per minute (generic)
UNITS_PER_HOURUnits per hour (generic)
CELSIUSDegrees Celsius
FAHRENHEITDegrees Fahrenheit
KELVINKelvin
BARBar
PSIPounds per square inch
KILOPASCALKilopascal
GRAMSGrams
KILOGRAMSKilograms
POUNDSPounds
MILLILITERSMilliliters
LITERSLiters
SQUARE_METERSSquare meters
SQUARE_FEETSquare feet
MILLISECONDSMilliseconds
SECONDSSeconds
MINUTESMinutes
HOURSHours
VOLTSVolts
AMPSAmperes
WATTSWatts
KILOWATT_HOURSKilowatt-hours
BYTESBytes
KILOBYTESKilobytes
MEGABYTESMegabytes
CUSTOMVertical-specific or user-defined unit — provide the unit name in customUnit
Vertical-specific count unit when countUnit is CUSTOM.
Average production speed.
Error code from the source.
Human-readable error description.
Error severity level.
Possible values (4)
INFOInformational notice
WARNINGWarning — production can continue
ERRORError — production impaired
FATALFatal — production stopped
What kind of operation this report is about. Drives operationData key validity.
Possible values (44)
PRINT_OFFSET_SHEETFEDOffset Sheetfed Press
PRINT_OFFSET_WEBOffset Web Press
PRINT_TONER_SHEETFEDToner Sheetfed Press
PRINT_TONER_WEBToner Web Press
PRINT_INKJET_SHEETFEDInkjet Sheetfed Press
PRINT_INKJET_WEBInkjet Web Press
PRINT_WIDE_FORMATWide Format Printer
PRINTER_LARGE_FORMATLarge Format Printer
REWINDINGRewinding
BINDING_SADDLE_STITCHSaddle Stitcher
BINDING_PERFECTPerfect Binder
BINDING_WIRE_OWire-O Binder
BINDING_SPIRALSpiral/Coil Binder
BINDING_COMBComb Binder
FOLDINGFolder
FOLDERFolder (Inline)
CUTTINGCutter
CUTTER_THREE_KNIFEThree-Knife Trimmer
COATING_LAMINATINGLaminator
COATING_FLOODFlood Coater
SPOT_UV_VARNISHSpot UV Varnish
DIE_CUTTINGDie Cutter
SCORING_CREASINGScoring/Creasing
PERFORATINGPerforator
DRILLINGDrill
PUNCHINGPunch
EMBOSS_DEBOSSEmbosser/Debosser
FOIL_STAMPINGFoil Stamper
COLLATINGCollator
SEWINGSewing Machine
BOOK_BLOCK_MAKERBook Block Maker
CASE_MAKINGCase Maker
CASING_INCasing-In Machine
ROUNDING_BACKINGRounding & Backing
ENDPAPER_TIPPINGEndpaper Tipping
GLUINGGluing
HEAD_BANDINGHead Banding
SPINE_MILLINGSpine Miller
CTPComputer-to-Plate
PLATEMAKINGPlatemaking
DRYINGDryer (General)
DRYING_UVUV Dryer
DRYING_IRIR Dryer
PACKINGPacking
Whether this report describes real production output or a non-production run (setup, proof, calibration, test). Null is treated as PRODUCTION.
Possible values (5)
PRODUCTIONReal production output. Default semantic when runKind is null.
SETUPPress setup / makeready before a production run.
PROOFProof print for customer or operator approval.
CALIBRATIONColour / density / register characterisation, no job-specific intent.
TESTCatch-all non-production run (machine check, ink flush, training run).
Capability-keyed flat path map: per-key entries (e.g. "/dpi/horizontal": 600).
Freeform integration-supplied JSONB blob.
Optional consumption rows (ink, substrate, etc.) created in the same transaction.
Width of the print run.
Length of the print run.
Total area printed.
Substrate display name.
Substrate type / material.
Width of the substrate stock used (across-web for roll media, the short edge for sheets) — not the width actually printed, which is widthPrinted. Supplied as {value, unit}; the unit is preserved verbatim and canonicalised to millimetres for reporting.
Length of the substrate stock used (along-web for roll media, the long edge for sheets) — not the length actually printed, which is lengthPrinted. Supplied as {value, unit}; the unit is preserved verbatim and canonicalised to millimetres for reporting.
Substrate caliper — the thickness of a single sheet/ply of the stock. Supplied as {value, unit}; typically expressed in micrometers or millimeters, and canonicalised to millimetres for reporting.
Substrate basis weight — mass per unit area, NOT the mass of the stock consumed. Supplied as {value, unit: {kind, basis?}}: kind: GSM for grams per square metre, or kind: POUNDS_AT_BASIS for US pounds-per-ream, which requires basis (e.g. TEXT_BOOK, COVER) because pound weights are meaningless without it. Canonicalised to g/m² for reporting.
FK to a Substrate catalog entry, if matched at write time.
Referenced by (1)
Exact type SDL
"""Input for createProductionReport."""
input CreateProductionReportInput {
"""Display name (Durst's "title")."""
name: String
"""User associated with this report (typically the operator on duty)."""
userId: UserID
"""
Free-form operator identifier when no user maps to the source-side operator (e.g. partner login, badge number).
"""
operatorIdentifier: String
"""Optional Job binding at write time."""
jobId: JobID
"""Optional Component binding."""
componentId: ComponentID
"""Optional Operation binding."""
operationId: OperationID
"""Optional OperationItem binding."""
operationItemId: OperationItemID
"""Optional WorkCenter binding."""
workCenterId: WorkCenterID
"""Multi-namespace external references for late binding."""
externalRefs: [ProductionReportExternalRefInput!]
"""
Partner-internal grouping keys (e.g. their jobId/printJobId). Implicitly scoped by the calling integration instance.
"""
groupingKeys: [DictionaryInput!]
"""ISO8601 start time."""
startedAt: ISO8601
"""ISO8601 end time."""
endedAt: ISO8601
"""Engaged-print-time only; distinct from end-start wall-clock."""
actualPrintingDurationSeconds: Float
"""Waste produced by the run in countUnit; omitted means unknown."""
wasteCount: Float
"""
The part of wasteCount produced during setup (makeready), in countUnit. Requires wasteCount and cannot exceed it; the rest is run waste. Omitted means the source did not split it.
"""
setupWasteCount: Float
"""
True when this is the final statement of the run. A final report cannot be edited; it is corrected by a new revision that supersedes it. A report that is not final can be edited by sending it again with the same source series and revision. Provisional, in-progress figures belong in progress points.
"""
isFinal: Boolean
"""
The current final report this one replaces, when the source's data changed after it was reported. The replacement must be final and complete: the same source series, operation, item and count unit, every measured field the replaced report had, and every material line it had (send an explicit zero rather than leaving one out). Refused once the replaced report's output has been accepted.
"""
supersedesReportId: ProductionReportID
"""
The report's identity in the system it came from. With it, sending the same report again is safe: identical content returns the saved report, and a report that is not final is edited in place. Omit for a report with no external identity.
"""
source: ProductionReportSourceInput
"""Good production count in countUnit; omitted means unknown."""
goodCount: Float
"""Planned production quantity."""
totalPlanned: Float
"""Unit for counts."""
countUnit: MetricUnit
"""Vertical-specific count unit when countUnit is CUSTOM."""
customCountUnit: String
"""Average production speed."""
averageSpeed: SpeedInput
"""Error code from the source."""
errorCode: String
"""Human-readable error description."""
errorMessage: String
"""Error severity level."""
errorSeverity: ProgressErrorSeverity
"""
What kind of operation this report is about. Drives operationData key validity.
"""
capabilityCode: CapabilityCode
"""
Whether this report describes real production output or a non-production run (setup, proof, calibration, test). Null is treated as PRODUCTION.
"""
runKind: RunKind
"""
Capability-keyed flat path map: per-key entries (e.g. "/dpi/horizontal": 600).
"""
operationData: [OperationDataEntryInput!]
"""Freeform integration-supplied JSONB blob."""
metadata: JSON
"""
Optional consumption rows (ink, substrate, etc.) created in the same transaction.
"""
consumption: [CreateProductionReportConsumptionInput!]
"""Width of the print run."""
widthPrinted: LengthInput
"""Length of the print run."""
lengthPrinted: LengthInput
"""Total area printed."""
areaPrinted: AreaInput
"""Substrate display name."""
substrateName: String
"""Substrate type / material."""
substrateType: String
"""
Width of the substrate stock used (across-web for roll media, the short edge for sheets) — not the width actually printed, which is `widthPrinted`. Supplied as `{value, unit}`; the unit is preserved verbatim and canonicalised to millimetres for reporting.
"""
substrateWidth: LengthInput
"""
Length of the substrate stock used (along-web for roll media, the long edge for sheets) — not the length actually printed, which is `lengthPrinted`. Supplied as `{value, unit}`; the unit is preserved verbatim and canonicalised to millimetres for reporting.
"""
substrateLength: LengthInput
"""
Substrate caliper — the thickness of a single sheet/ply of the stock. Supplied as `{value, unit}`; typically expressed in micrometers or millimeters, and canonicalised to millimetres for reporting.
"""
substrateThickness: LengthInput
"""
Substrate basis weight — mass per unit area, NOT the mass of the stock consumed. Supplied as `{value, unit: {kind, basis?}}`: `kind: GSM` for grams per square metre, or `kind: POUNDS_AT_BASIS` for US pounds-per-ream, which requires `basis` (e.g. TEXT_BOOK, COVER) because pound weights are meaningless without it. Canonicalised to g/m² for reporting.
"""
substrateWeight: PaperWeightInput
"""FK to a Substrate catalog entry, if matched at write time."""
substrateId: SubstrateID
}