← All types
In Input object

BookCreepInput

Automatic or calibrated translation for uniform-stock, explicit LEFT binding, SHEETWISE f4 saddle or gathered single-fold construction. Requires stock caliper; displacement cannot exceed allocated bleed. Rendering also requires source bleed to cover the fixed clip after translation. Artwork-attached finishing is unsupported. Omission means no compensation, not physical production approval.

Fields

AUTOMATIC uses nominal caliper and factor 1 unless factor is supplied; no calibration reference. Omit to retain legacy calibrated factor or measured-offset selection. Explicit methods must match their fields.

Possible values (3)
AUTOMATIC

Conventional nominal-caliper centreline model with optional factor; no customer calibration required.

CALIBRATED_LINEAR

Explicit factor times cumulative centre-line depth from resolved stock caliper.

MEASURED

Explicit measured per-page offsets for this nesting group.

Required for calibrated/measured methods; forbidden for AUTOMATIC. Nonblank process/material reference, at most 256 UTF-8 bytes; not certification.

factor

FloatOptional

Dimensionless factor, greater than zero and at most 10; defaults to 1 only for AUTOMATIC. Per-page spineward offset is factor times cumulative centre-line nesting depth. Mutually exclusive with measuredOffsets.

Measured per-page spineward lengths, outermost first; one per nested sheet, starting at zero and nondecreasing. Gathered f4 sections each require the single value zero. Mutually exclusive with factor.

Referenced by (2)
Exact type SDL
"""
Automatic or calibrated translation for uniform-stock, explicit LEFT binding, SHEETWISE f4 saddle or gathered single-fold construction. Requires stock caliper; displacement cannot exceed allocated bleed. Rendering also requires source bleed to cover the fixed clip after translation. Artwork-attached finishing is unsupported. Omission means no compensation, not physical production approval.
"""
input BookCreepInput {
  """
  AUTOMATIC uses nominal caliper and factor 1 unless factor is supplied; no calibration reference. Omit to retain legacy calibrated factor or measured-offset selection. Explicit methods must match their fields.
  """
  method: CreepMethod
  """
  Required for calibrated/measured methods; forbidden for AUTOMATIC. Nonblank process/material reference, at most 256 UTF-8 bytes; not certification.
  """
  calibrationReference: String
  """
  Dimensionless factor, greater than zero and at most 10; defaults to 1 only for AUTOMATIC. Per-page spineward offset is factor times cumulative centre-line nesting depth. Mutually exclusive with measuredOffsets.
  """
  factor: Float
  """
  Measured per-page spineward lengths, outermost first; one per nested sheet, starting at zero and nondecreasing. Gathered f4 sections each require the single value zero. Mutually exclusive with factor.
  """
  measuredOffsets: [LengthInput!]
}